Concrete mixing station point of choose and buy
[2015-03-18 16:42:10] HaomeiConcrete mixing station point of choose and buy
The performance of the construction of concrete label; In order to choose what kind of mixing console. Such as water conservancy project must choose compulsory mixing console. Additional, still should according to the mixing concrete material type selecting ingredients station and storage bin.
The task of the construction of concrete volume and time limit for a project; With the two parameters to decide how to use the specification of mixing plant. A concrete addition quantity of M; The concrete number of days for T; Working hours a day for H; Utilization coefficient K, should choose the specifications of the mixing station X = M/T * H * K), K is 0.7 to 0.7. Consideration in the selection of finished concrete transportation condition. Such as: direct pumping or transport vehicles. Transportation vehicle volume is also decided to main types of important basis.
Construction environment and construction object; When choosing to buy concrete mixing station, should fully consider the effect of construction object and environment, so as to ensure smooth construction and construction quality. In the following cases, we recommend that you prepare for the best.
When the site of a one-time pouring amount is larger, higher quality requirements, and no reinforcements near the station, had better choose two specifications smaller mixing station, or select a primary a pair of double machine configuration. Traffic inconvenience, when the site maintenance personnel in and out of the site need to spend a lot of time, had better choose smaller with the same specifications of the double machine station, or prepare enough spare parts, to ensure construction progress smoothly.
When the work is scattered, but not too far, distance between the site concrete mixing transporter transmission radius is less than half an hour is drive, dump truck transport no more than 10 minutes. Had better use gonghaowu concentrated more stirring, to improve the utilization rate of mixing plant and construction of economic benefits. Operating personnel quality; Structure is simple, in general, small mixing station control system is simple, so the low required for operation and maintenance personnel. And larger stand structure is complex, high degree of automation, so taller also to the requirement of the operating personnel. So when you are buying station in addition to consider several factors before, this factor should also be considered.
Configuration choice; In general, the manufacturer has a mature product configuration, such as specification, quantity, variety, etc. You can in the product when ordering your special request. We will try our best to meet your requirements. But avoid by all means go in for grandiose projects when the choose and buy products, it will cause economic do not waste. When the choose and buy other products in addition to the reference to the price of different manufacturers, also should pay special attention to the listing of the different sorts of the manufacturer. Apart from the above
specification, species and quantity, is the most important parts of the manufacturer. Heald above detailed, you can always choose the most suitable models. When choosing models do not go for the best, but should be the pursuit of the most suitable and meet your demand, because such a choice is the most economic and effective.